Decorative Anti-Skateboarding Guards

Protect your property against skateboard damage with anti-skateboard guards. The key areas of a property that attract skateboarders include stairway railings, benches, and concrete retaining walls, fountain edges and planters.

All these surfaces are easily protected by adding deterrents that stop skateboarders from grinding along them. We offer a wide selection of anti-skateboard guards to compliment your property’s aesthetics along with complete installation in Vancouver and throughout the Lower Mainland

Anti-Skateboard Guards for Hand Railings

Raised Diamondback Handrail Guard

Raised Diamondback Handrail Guards

Raised design offers greater protection for railings. Available in cast aluminum or cast bronze.

For 1.6″ and 1.9″ (4.0 cm and 4.8 cm) diameter railings

Handrail Guards

Leaf Decorative Handrail Guard

Leaf Decorative Handrail Guards

Decorative handrail guards offer both protection and a nice design aesthetic. Available in cast aluminum or cast bronze.

For 1.6″ and 1.9″ (4.0 cm and 4.8 cm) diameter railings

Anti-Skateboard Guards for Surface Edges

Laser Anti Skateboard Guard

Laser Modern Edge Guards

The laser series is made from aluminum and has a clear anodized finish.

Length 8″ (20.3 cm), width 1-1/8″ (2.8 cm). There are four edge radius options to choose from: Flat 90 degree angle to 1/8″ rounded, 1/2″ rounded, 1.0″ rounded, and 45 degree chamfer.

Aluminum Edge Guard

0.12″ Flat Radius Aluminum Guards

Perfect for granite and marble with sharp edges, and for solid bench seats with no slats and with small radius edges.

4.875″ (12.4 cm) long and 2.0″ (5 cm) wide with a 1/8″ (0.12″) radius

Our most popular Skate Guard

half inch radius edge guard

0.5″ Rounded Radius Aluminum Guards

Suitable for precast or poured concrete edges that are slightly rounded.

3.75″ (9.5 cm) long and 2″ (5 cm) wide with a 1/2″ (1.27 cm) radius

Small radius rounded edge guards

Bullnose Edge Guard

1″ Bullnose Radius Edge Guards

For wide radius edges made from bullnose brickwork or poured concrete.

4.375″ (11.1 cm) long and 2″ (5 cm) wide with a 1.0″ (2.5 cm) radius

Large radius rounded edge guards

45 Degree Chamfer Guard

45 Degree Chamfer Aluminum Edge Guards

Use on 45 degree chamfered edges such as poured concrete or marble / granite with chamfered edges.

3.75″ (9.5 cm) long and 2.0″ (5 cm) wide with a 45 degree flat edged radius

Skate guards for 45 deg chamfered edges

Heavy Duty Edge Guard

Raised Block Hard Radius Edge Guards

Best for hard-cornered natural stone and concrete surfaces where a heavy-duty anti-skateboarding deterrent fits in aesthetically with the surrounding architecture.

4.0″ (10 cm) long and 2.0″ (5 cm) wide with a 1/8″ (0.12″) radius

Heavy duty anti-skateboard guard

Cast Aluminum Anti-Skateboard Guards

Special Order Only. Decorative leaf-style guards are not stocked. Available by special order only and require 10-12 weeks for delivery. All other anti-skateboard guards are readily available.

Maple Leaf Decorative Anti-Skateboard Guards

Maple Leaf Decorative Anti-Skateboarding Guards

These special cast aluminum guards are the best in decorative guards that add more appeal to your property while also protecting it. Also available in silicon bronze.

5.0″ (12.7 cm) long and 5.0″ (12.7 cm) wide with different edge radius options of 1/8″, 1.0″, and 45 degree chamfer

Oak Leaf Decorative Anti-Skateboard Guards

Oak Leaf Decorative Anti-Skateboarding Guards

Another popular decorative guard. Available in cast aluminum or silicon bronze.

6.0″ (15.2 cm) long and 3.0″ (7.6 cm) wide with edge radius options of 1/8″, 3/4″, 1.0″, and 45 degree chamfer

Gum Leaf Decorative Anti-Skateboard Guards

Gum Leaf Decorative Anti-Skateboarding Guards

Shown in bronze. Available in cast aluminum or silicon bronze.

5.0″ (12.7 cm) long and 5.0″ (12.7 cm) wide with an edge radius of 1/8″ (for hard 90 degree corners)

About Anti-Skateboarding Guards



Vancouver Anti-Skateboarding Guards Installation

HeavyDuty Anti-Skateboard Guards for Railings

Skateboard guards prevent damage by adding obstacles along the smooth edges of railings, benches, and short concrete walls that skateboarders like to grind along.

Typically, they should be spaced about 24″ (2 feet) apart, with between 12″ and 18″ of space from either end of the surface they are guarding. Guards are anchored into the surface using industrial-strength impact-resistant epoxy and metal anchor pins. Note though, guards should not be attached at grout lines or expansion joints.

For special applications such as benches made of wooden slats, anchor pin position is critical in attaching the guards securely. The flat radius aluminum guards offer the best solution for this application because the anchor points can be determined during installation, whereas most guards have predetermined anchor positions.

They are available in their natural weather resistant metal alloys or, upon request, they can be powder-coated in a variety of colours to suit the surrounding architecture.